The card capture readeris used to collect and store visitors' guest cards that they can retrieve when leaving the facility.
Used as part of an access control system, made of stainless steel, and based on a servo-driven mechanism.
Equipped with a 5" color display.
The minimum capacity is 500 cards.
The UCM-1B.3 Card capture reader is made of AISI 304 stainless steel, based on a servo-driven mechanism. Is installed optionally and depends on the facility's ACS. It operates in tandem with a turnstile or a gate
To leave the territory, the visitor needs to insert a pass into the card reader and then pass through the turnstile.The automated collection of passes ensures speeding up customer service.
Sensors: card acceptance, overflow and bunker sensors.
Dry contacts for ACS controller communication.
Minimum capacity 500 cards.
| Parameter name |
Value |
| Материал исполнения стоек |
Stainless steel AISI 304 |
|
DC supply voltage, V | 12 |
|
Power consumption in standby mode, no more than, W | 3 |
|
Power consumption in intensive use mode, no more than, W | 5 |
|
Operating frequency, MHz Reading range, up to, mm |
13,56 |
|
Number of built-in readers, pcs Supported card types |
1 |
Color IPS display 5”, pcs: resolution, pixels brightness, not less, cd/m2 |
1 800х480
700 |
|
Case protection degree | IP40 |
|
Overall dimensions of turnstile module, l/w/h, mm |
200/164/1040 |
|
Weight, not less than, kg |
18 |
We, as manufacturers, reserve the right to make changes to the design of the device (including changes in overall dimensions), without being reflected in the technical data sheet, which do not reduce the consumer properties and do not impair the quality of the device.
Site created by — 
