Vector


Motorized stainless steel turnstile with a drop arm. 

It is equipped with IP- cameras, a barcode scanner, and a contactless card reader.

Optionally, it can be equipped with IP cameras.


1 (10).jpg



IN COMPARISON WITH MOST TURNSTILES, VECTOR SMART TURNSTILE OFFERS A NUMBER OF ADVANTAGES:

  • This is a full-featured IP device with all components (controller, reader, software, biometric cameras) pre-installed in the turnstile. Reliable, convenient, aesthetically pleasing.
  • Built-in full-featured access control soſtware allows the smart turnstile to work independently, without connecting to an external ACS, and easily integrate with any external information systems, for example, with a pass payment system, a document management system, any facility access control system, etc., as well as control the turnstile using hardware or software remotes. 
  • User friendly and simple control interface + API for connecting to an external ACS.
  • Multiple identification factors allow using any method of passage through the turnstile – contactless cards, all types of bar/QR codes, biometric data (for example, face), BLE and NFC tags, as well as configure multi-factor access by several parameters.
  • The turnstiles have built-in facial recognition IP cameras and are compatible with most renowned face recognition solutions. 
  • A bright color screen displays graphic and video messages, e.g. ticket status, access permission or the reason for denial of passage, any service messages, etc.
  • Intelligent light indication shows the passage direction and ticket/visitor category/ unauthorized passage attempt.
  • The built-in ACS controller automatically switches between online and offline modes and downloading changes from an external system enables the smart turnstile to continue operating even in the event of a communication or power outage.
  • High throughput. Instant triggering when the identifier is presented.

The equipment is certified and meets the necessary safety requirements.


The equipment complies with the transport security requirements approved by RF Government Decree No. 969 of September 26, 2016 and can be used to build an access control system at transport infrastructure facilities.


Sertificates

      
   Parameter name  Value    
AC supply voltage, V
230
Consumption current maximum, A
2
Power consumption in standby mode, W
Power consumption in intensive use mode, W
30
40
Capacity, passages/hour:
in the barcode
in the contactless card pass mode
in free pass mode
in evacuation mode

700
1800
2400
Passage is completely open
Passage zone width, mm
550
Drive unit
Motorized (swing) with with automatic anti-panic function
Number of built-in IP cameras*, pcs
         Lens, mm
         Resolution, Mp
         Maximum image resolution, dots, pixels
         Video compression
2
2.8
2
1920х1080
H.265/H.264/MJPEG
Color IPS display 10.1”, pcs:

resolution, pixels
brightness, not less, cd/m2

1
1280х800
1000
Number of barcode scanners, pcs
Supported barcode types:
linear (1D)

two-dimensional (2D)
2
1D/2D
EAN-8, EAN-13, UPC (UPC-A, UPC-E), Code 56, Code 128 (UPC/EAN-128), Codabar, «Interleaved 2 of 5» etc.

PDF417, MicroPDF417, MaxiCode, Data Matrix, QR Code, Aztec, Aztec Mesa, Code 49, EAN·UCC Composite etc.
Number of built-in readers, pcs
Operating frequency, MHz
Reading range, up to, mm
Supported card types
2
13,56
50
ISO 14443 Part 4 Type A and B, MIFARE Series (MIFARE Classic 1K/4K, MIFARE (Ultralight/Ultralight EV1) etc.

Smart control box:

modes

number of stored ticket identifiers, pcs 
   
Online/Offline
10 000 000
Mean time between failures, not less than, passes
20 000 000
Interfaces
Ethernet, "‎Dry contacts" (in/out), fire alarm system input
Operating temperature, °C   
+5/+40
Average service life
8 years
Overall dimensions of turnstile module, l/w/h, mm With blocking arm in working mode
In evacuation mode
        
794/490/1040
294/809/1040

Weight*, not less, kg

70
Case protection degree
IP40

 *Parameter may vary depending on modification.

We, as manufacturers, reserve the right to make changes to the design of the device (including changes in overall dimensions), without being reflected in the technical data sheet, which do not reduce the consumer properties and do not impair the quality of the device.